Please see the videos below to see the difference between using the correct driver for the visualplanet touchfoil™, and the Incorrect Driver.
Correct
The correct driver will show a demonstration of the user's finger generating peaks in the graph when running their finger along the touchfoil™'s active area horizontally, and vertically. By running the finger along both the X and Y axis you will see that the peaks follow on in a sequential order. You will notice each wire moving independently of its neighbours.
Incorrect
Using an incorrect driver will demonstrate the user's finger generating peaks which jump from the left side to the right side, instead of following in a sequential order. You will also notice that by using the wrong driver for the visualplanet touchfoil™ you will not be able to perform Calibration.
Summary
The correct driver for the visualplanet touchfoil™ can be found in the following locations:
If you have Installed/Downloaded more than one driver, to find out which one you are using select "Help" in MA7 Control, then select "About..." to show the driver in use. (See "Warnings when installing/downloading multiple drivers" post)
Correct
The correct driver will show a demonstration of the user's finger generating peaks in the graph when running their finger along the touchfoil™'s active area horizontally, and vertically. By running the finger along both the X and Y axis you will see that the peaks follow on in a sequential order. You will notice each wire moving independently of its neighbours.
Incorrect
Using an incorrect driver will demonstrate the user's finger generating peaks which jump from the left side to the right side, instead of following in a sequential order. You will also notice that by using the wrong driver for the visualplanet touchfoil™ you will not be able to perform Calibration.
Summary
The correct driver for the visualplanet touchfoil™ can be found in the following locations:
- The touchfoil's tail
- The touchfoil dirver CD label
- The Copyright tab of MA7 Control
- The Help / About menu of MA7 Control
- The touchfoil's part number
If you have Installed/Downloaded more than one driver, to find out which one you are using select "Help" in MA7 Control, then select "About..." to show the driver in use. (See "Warnings when installing/downloading multiple drivers" post)
back to touchfoil support back to visualplanet.biz